Dec 10, 2024 Leave a message

Which Four Circuits Are The Four-circuit Protection Valves?

The four circuits of the four-circuit protection valve are:

● Service brake circuit: responsible for controlling the vehicle's service brake system, including the front and rear wheel brakes.

● Emergency brake and parking brake circuit: provides air source for the emergency brake and parking brake systems of the truck, and also supplies air for the trailer.

● Auxiliary brake circuit: specifically supplies air for the auxiliary brake system.

● Parking brake circuit: responsible for the vehicle's parking brake system.

Working principle of the four-circuit protection valve: It is actually a five-way connector. Under normal circumstances, it divides the entire vehicle's air circuit into four circuits that are both interconnected and independent of each other. The compressed air from the air dryer enters the four-circuit protection valve through a specific inlet, and then is distributed to the four circuits of the system through the bypass hole and the one-way valve. When the pressure under the valve reaches the preset opening pressure, the valve opens and the compressed air enters different circuits through the corresponding outlets. If a circuit fails, the air in other circuits will replenish the failed circuit until the dynamic closing pressure is reached. At this time, the spring force will close the valve to protect other circuits from being above the safety pressure.

‌Purpose of the four-circuit protection valve‌: Mainly used in multi-circuit air brake systems. When one of the circuits fails, it can still ensure a certain safety brake air pressure in other circuits. The four air outlets are independent of each other and can control the front and rear wheels, trailers and auxiliary air circuits respectively.

Send Inquiry

Home

Phone

E-mail

Inquiry